SIGNAGE EQUIPMENT

IMAGESETTERS



 

 


Output 4-color process separations with traditional line screen rulings of up to 80 lpi: Resolution 600 x 600 dpi and 600 x 1200 dpi: Registration within ± 0.01%: Produce solid image areas over sizes of 80 in. OYO's optional software RIPs can produce traditional halftone screens as well as stochastic screens with an adjustable dot size.

The Liberator Wide Format Series can be interfaced to existing RIPs via a Versatec Parallel Interface (VPI) or optional SCSI to VPI interface.

The Liberator Wide Format Series uses a chemistry-free, dry film developed specifically for the OYO line of Thermal Imagesetters. This unique film consistently produces typical UV readings of 0.12 D.Min and 4.0 D.Max or greater.

 

 
Features:
  • 36", 42" and 54" media widths
  • Resolution 600 x 600 dpi and 600 x 1200 dpi, depending on application
  • Chemistry-free polyester film
  • Pos/Neg imaging up to 0.15 in/sec
  • Adjustable contrast and step accuracy
  • Versatec Parallel or SCSI to Versatec Parallel Interface

Benefits:
  • Chemistry-free
  • Darkroom-free
  • Processor-free
  • Low-cost wide format solution
  • Low maintenance
  • Designed for heavy duty performance
  • Designed for 'Hands-Off' operation
  • 12 month limited manufacturer's warranty
SPECIFICATIONS
POWER REQUIREMENTS
Printhead Configuration:
  Single-substrate, linear array  
Voltage:
  115 or 230 VAC (Auto-switch)
Printing Method:
 Direct thermal technology  
Frequency:
 50-60 HZ
Resolution:
 600 x 600 or 600 x 1200 dpi  
Power Usage:
 90 Watts idle mode
Film Drive:
 Stepper motor  
1,000 Watts plot/print mode
Paper Type:
 ThermoImpression® proofing media  
Temperature:
 Operating: 0 to50 degrees C
Paper Length:
 200 foot roll  
Storage Range: -10 to70 deg C
Film Type:
 ThermoImpression® polyester film
Humidity: 5-95%
Film Length:
 200 foot roll  
Optical Density (Film):
 4.0 typical (UV)  
Stepping Increment:
 0.104 mils  
Stepping Accuracy:
 +- 0.01%  
Dot Alignment Error:
 +- 0.01%  
IMAGESETTER MODEL SELECTION CHART
MMODEL LIBERATOR 3600 LIBERATOR 4200 LIBERATOR 5400
  Part Number: 636-104005 644-104006 654-104001
  Media Width: 36 in (91.4 cm) 42 in (107 cm) 54 in (137 cm)
  Plot Width: 35.84 in (91 cm) 41.81 in (106.2 cm) 53.76 in (136.55 cm)
  Dots per Scan: 21,504 25,088 32,256
  Bytes per Scan: 2,688 3,136 4,032
  Plot Rate: 0.15 ips 0.15 ips 0.15 ips
  Height: 11 in (27.9 cm) 11 in (27.9 cm) 11.25 in (28.6 cm)
  Width: 45 in (114 cm) 53 in (135 cm) 63 in (160 cm)
  Depth: 21 in (53.3 cm) 21 in (53.3 cm) 21 in (53.3 cm)
  Net Weight: 155 lb (70 kg) 185 lb (84 kg) 232 lb (105 kg)


LIMITED WARRANTY

OYO Instruments Inc. warrants this product to be free from defects in material and workmanship for a period of one year from date of shipment. Use of media not approved by the manufacturer may void the warranty of the thermal printhead.

Specifications are subject to change without notice.

BACK
1116 MacDade Blvd., PO Box 1387, Collingdale, PA 19023-8387 (800) 528-1153 fax (888) 528-1153